Made To Order Foam Respirator Face Mask with Adjustable Straps and Removal Hooks

Reusable Foam respirator made with bra materials which addresses many of the issues that make a mask uncomfortable and less effective. 

Adjustable comfort headband straps and a shape modeled after the sought after N95; places the mask away from the mouth when worn, making it less hot, more sanitary and comfortable to wear long term.   

To maintain proper filtration there must be a layer that is not perforated with holes from a sewing needle. Each mask we sell has 3 layers of Origami Folded polypropylene with no seams and no pins used in the process.

$45.00

If you choose to place a mask on backorder, please allow 2 to 3 weeks for production. You will be notified once your item is ready for delivery.

 

VERIFY MY SIZE

 

Do To Covid 19 we can not accept returns for any reason.

Please use this template with instructions and watch the video below to find your correct size.

 

 

Feel free to send over any questions using our contact section above. 

Its what's inside that counts - A nanofiber Filter

Our filters are made with an electrostatic charged nanofiber fabric. An extremely thin, fibrous material inlaid and backed with an additional layer of polypropylene.

What is a nanofiber and how is it made?

Picture these nanofibers as one long microscopic continuous spaghetti noodle that forms a permanent web with such microscopic holes—that larger pieces of dust and contaminants aren’t able to penetrate the surface of the substrate. This creates a very fine, continuous, resilient fiber of 0.2 – 0.3 micron in diameter that is then applied to a filtration media substrate material.

This web collects dust, dirt and contaminants on the surface of the filter; this offers many benefits over conventional filters built with cellulose, cellulose/synthetic, spunbond, or meltblown commodity filtration media​. The total manufacturer specifications are shown in the product gallery.

Rust Resistant Aluminum Nose Wire

Once again fit matters!

A 4 inch flat rust resistant aluminum nose wire helps conform the fit more closely to the face helping to reduce fog build up on glasses and create a tighter seal. 

Construction Matters

One of the factors that makes a quality mask is how it is put together. To maintain proper filtration there must be a layer that is not perforated with holes from a sewing needle.

Each mask we sell is Origami Folded with no seams and no pins used in the process.

Why Fit is Important

An improper fitting mask can lead to air leaks, and an uncomfortable mask may not be not even be worn at all.

We have developed masks in a variety of sizes, styles and prices built to accommodate everyone.

 

Who have we helped?

So far we have been able to donate masks to Multiple Harris Hospital units, The Children's Hospital and have more going to the the COVID JRB and many more.

How we have helped?

We have had a large amount of people requesting to purchase masks. It has been extremely difficult for us turn away people wanting to protect themselves and their families. 

Thinking about shortage and the need for PPE forced us to contemplate a better way to produce even more.

We are professionals that feel are much better served to everyone by bringing our team back to the machines and quickly developing a quality product that helps all involved. 

Lining: Poly foam

Inner Lining: 3 layers non-woven polypropylene filter fabric

Shell: 94% Poly 6% Spandex Microfiber

Straps: 85% Nylon/15% spandex. While this product itself is latex-free, it is manufactured in a plant where latex is made. We cannot guarantee that the product has not come in contact with latex particles.

Hardware:  Silver plating over Zamac base (aluminum/zinc alloy). Our silver Rings Sliders are coated in an additional varnish to prevent tarnishing

Care Instructions: Wash Instructions

Tossing your face masks—along with all clothes worn outside—in a hot-water laundry cycle is a great way to sanitize them. Just as hand soap disintegrates the virus by breaking its exterior, your trusty detergent will be enough to leave your face masks ready for another use. Pay special attention to temperature, though, Noble says—it’s an added layer of protection.

Water heated to 140 degrees Fahrenheit has proven effective at degrading most viruses, the World Health Organization  recommends this temperature for treating contaminated clothes and fabrics.

 

DISCLAIMER: TLD International, LLC (DBA Taylor Lane Designs) makes no warranties, either express or implied that this material or mask prevents infection or the transmission of viruses or diseases. Do not use this in any setting or where significant exposure to liquid, bodily or other hazardous fluids, may be expected.We are not a substitute to the Government approved N95 masks but we can say with confidence that with 3 folded layers they do offer superior filtration to cotton and remain one of the most comfortable and versatile options available. These masks have not been evaluated by the FDA  and are not for use in settings where the infection risk level through inhalation exposure is high.  the performance or masks made from it.
Limitation Of Liability - TLD International, LLC (DBA Taylor Lane Designs) will not be liable for any loss or damage coming from this face protection product, whether direct, indirect, special, incidental or consequential. Some states and countries do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

Additional information

Main Colorway

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

SKU: N/A Category:

DISCLAIMER: TLD International, LLC (DBA Taylor Lane Designs) makes no warranties, either express or implied that this material or masks made from it, prevent infection or the transmission of viruses or diseases. Do not use this material in any setting or where significant exposure to liquid, bodily or other hazardous fluids, may be expected. Do not use this in settings where the infection risk level through inhalation exposure is high. Do not use this material in the presence of an open flame, heat source or flammable gases or liquids. All data contained above is nominal and provided for information purpose only. Our Masks are not a substitute for medical treatment or medical devices.